TFT technology，it is short for Thin-Film-Transistor technology. It is the mainstream technology for color display in flat display industry.
To achieve color display, TFT technology divides one pixel into 3 color sub-pixels, which is called "RGB" pixel. By driving differently to these sub-pixels, it can perform different color by different mixing ratio of each RGB pixel.
Techshine Electronics focus on small and middle size TFT module production, who can support from 0.96 to 7.0 inch in-house TFT module process, including Touch Panel assembly and full-lamination.
The process line up for TFT module and TP lamination:
4 full-automatic lines of TFT module process (up to 7.0 inch)
1 semi-automatic line of TFT module process (up to 15.6 inch)
Total capacity for TFT module is 62Kpcs per day.
1 line of high-grade TP/cover lens optical bonding process (OCA lamination, optically alignment)
Optical bonding capacity is 15Kpcs per day.
Techshine's TFT module product is widely applied on--- Cordless Phone, POS, Home appliance, Medical, Industrial and consuming electronics.
STN technology，it is short for Super Twisted Nematic technology. Normally, the liquid crystal molecule is twisted at 240 degrees, which has a bigger twisted angle comparing to TN technology.
幸运飞艇破解公式Comparing STN to TN, the viewing angle of STN is wider than TN under the same driving condition.
The main advantage of STN technology is it can support high resolution graphic display up to 320*240 dots.
Techshine Electronics has set up 2 high-grade STN front process line. Both of the lines are running 14*16 inch mother glass. The mass production started at 2011(1st STN line) and 2016(2nd STN line). Daily capacity is 5,500 sheets (Around 500Kpcs of 2.0inch LCD size).
Main Structure of STN LCD：
STN LCD PANEL，by Zebra or Heat-seal connection to customer board
STN LCD PANEL+Metal PIN, by socket or soldering connection to customer board
STN LCD PANEL+FPC/HSC, by ZIF/B2B connector or soldering connection to customer board
STN LCD PANEL+COG+FPC/Metel PIN, by ZIF/B2B connector or soldering connection to customer board
STN LCD COB Module
Main Display Mode：
STN technology can achieve different display mode though different design configuration(Polarizer and liquid crystal parameter).
STN Gray Mode---Blue font on Gray background color
STN Blue Mode---White font on Blue background color(Negative type, Backlight needed)
STN Yellow-Green Mode---Black font on Yellow-Green background color
FSTN(Flim STN) ---Black font on White background color
DFSTN(Double Film STN)---White font on Black background color(Negative type, Backlight needed)
Also it can achieve more display performance by using different color of backlight
TN technology，it is short for Twisted Nematic technology. Normally, the liquid crystal molecule is twisted at 90 degrees. Comparing to other LCD panel technologies, TN type has the merit of lower cost and quick response time, which is mostly used for customized segment pattern display.
Main structure of TN LCD solution：
TN LCD PANEL，by Zebra or Heat-seal connection to customer board
TN LCD PANEL+Metal PIN, by socket or soldering connection to customer board
TN LCD PANEL+FPC/HSC, by ZIF/B2B connector or soldering connection to customer board
TN LCD PANEL+COG+FPC/Metal PIN, by ZIF/B2B connector or soldering connection to customer board
Cross-section view of TN LCD panel：